Effect of Wavy (Corrugated) Twisted Tape Inserts on Heat Transfer in a double Pipe Heat Exchanger

Authors

  • Mr. A. S .Kurhade Department of Mechanical Engineering, GSMCOE, University of Pune, India
  • Prof. M. M. Dange Department of Mechanical Engg. Faculty of Engineering, GSMCOE, University of Pune, India
  • Prof. D. B. Nalawade Department of Mechanical Engineering, Faculty of Engineering, VIIT, University of Pune, I ndia

Keywords:

Heat transfer,, heat exchanger,, wavy twisted tape,, turbulent

Abstract

In the present work heat transfer and friction factor properties we re experimentally investigated by using copper wavy (corrugated) twisted tape inserts. The turbulent flow w as created by inserting the wavy twisted tape inserts into the inner tube of heat exchanger creating high rate of t urbulence in pipe, which results in increasing heat transfer enhancement and pressure drop. The tape consists of the cor rugations and the twisting with various twist ratios (TR=10.7, 8.5, 7.1). The length and width of insert was 1 meter an d 14 mm respectively. The outer tube of heat exchanger is made up of mild steel with outside diameter 0.0198 m & 0.0142 m inside diameter and the inner tube is made up of copper with 0.038 m outside diameter and 0.032 m inside di ameter. The length of pipe in pipe heat exchanger is 1.4 m. The bulk mean temperatures at various posit ions are used for different flow rate of water. From the obtained results the new Correlations for Nusselt number and friction factor are developed for twisted tape inserts. The Reynolds number is varied from 5000 to 17000. The results of varying twists in wavy twisted tape inserts with different pitches have been compared with the val ues for the smooth tube. It showed that the highest heat transfer rate was achieved for the wavy twis ted tape with twist ration 7.1. The Nusselt number value increased by 172 % and friction factor value increased by 32.11% as compared to the sm ooth tube values.

Downloads

Published

2021-03-27

Issue

Vol. 2 No. 1 (2015): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Mr. A. S .Kurhade, Prof. M. M. Dange, & Prof. D. B. Nalawade. (2021). Effect of Wavy (Corrugated) Twisted Tape Inserts on Heat Transfer in a double Pipe Heat Exchanger . International Journal of Innovations in Engineering Research and Technology, 2(1), 1-8. https://repo.ijiert.org/index.php/ijiert/article/view/251