EFFECT OF CUTTING TOOL ON SURFACE ROUGHNESS OF WORKPIECE MATERIAL

Authors

  • Satish M.Rajmane Research Scholar, WIT Research Center, Solapur University, Solapur, India
  • Jeevankumar A.Sodal ME-(Mech)-II Student, Bharat Ratna Indira Gandhi College of Engineering, Solapur, India

Keywords:

INTRODUCTION, PROBLEMS WITH THE TURNING OPERATION

Abstract

The cutting operation is nothing but removal of unnecessary material on workpiece by machining which includes operations like turning, facing, Grooving etc. Turning is one of material removal operation in which material from cylindrical workpiece is removed keeping Tool stationary & workpiece rotating. The cutting operation is affected by its cutting speed, feed & depth of cut. Also other factors like shape n geometry of Tool & coolant used have some effect over turning operation, which is done on either Conventional Lathe or CNC machine. The values of cutting speed, feed & depth of cut are responsible for the surface roughness of workpiece material after turning operation. Also they are responsible for rate of production & tool life. Because of this, these parameters needs to be optimized to achieve the best combination for achieving higher rate of production with the required surface finish of workpiece material which is the main objective.

Downloads

Published

2021-03-27

Issue

Vol. 3 No. 1 (2016): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Satish M.Rajmane, & Jeevankumar A.Sodal. (2021). EFFECT OF CUTTING TOOL ON SURFACE ROUGHNESS OF WORKPIECE MATERIAL. International Journal of Innovations in Engineering Research and Technology, 3(1), 1-13. https://repo.ijiert.org/index.php/ijiert/article/view/826