DESIGN AND ANALYSIS OF NEW COUPLING SYSTEM IN INJECTION MOLDING MACHINE TO IMPROVE SCREW LIFE
Keywords:
Reciprocating Screw,, Barrel,, mouldAbstract
Injection molding machine is the most commonly used manufacturing process for the fabrication of plastic parts. The plastic being melted in injection molding machine and then injected into the mould. The barrel contains reciprocating screw for injecting the material into the mould and the material is also melted into the barrel. This project deals with, the solution of problem occurred for reciprocating screw of Injection molding machine. It identifies and solves the problem by using the modeling and analysis techniques.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
