Micro Fabrication of CNT based fibers

Authors

  • Manjunath E B Department of Mechanical Engineering, Center for P G Studies, Bangalore Institute OfTechnology, K.R.Road, V.V.Puram, Banglore-560004
  • Aravind V Department of Mechanical Engineering, Bangalore Institute of Technology, K.R.Road, .V.V.Puram, Bangalore-560004
  • Somanna M Y Department of Mechanical Engineering, Bangalore Institute of Technology, K.R.Road, .V.V.Puram, Bangalore-560004

Keywords:

INTRODUCTION, METHODS OF SPINNING, SPINNING FIBER FROM AEROGEL OF CNTS, SOLUTION BASED SPINNING TECHNIQUES

Abstract

The discovery of carbon nano tubes (CNTs) was a major breakthrough on a technological front. But, these CNTs have largely failed to relate to the real world problems because of the difficult material synthesis and laborious processing. These multifunctional carbon nanotubes (CNT) fibers combine the specific strength, stiffness, and thermal conductivity of carbon fibers with the specific electrical conductivity of metals. But realizing these excellences in practical applications needs to assemble individual CNTs into larger scale products. In this paper, we review some key spinning techniques like spinning from a vertical aligned CNT arrays, Electrophoretic spinning, spinning from CNT aerogel and solution spinning techniques include surfactant based spinning, liquid crystal based solution spinning.

Downloads

Published

2021-03-27

Issue

2015: RTME

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Manjunath E B, Aravind V, & Somanna M Y. (2021). Micro Fabrication of CNT based fibers. International Journal of Innovations in Engineering Research and Technology, 1-6. https://repo.ijiert.org/index.php/ijiert/article/view/352