EXPERIMENTAL INVESTIGATION & OPTIMIZATION OF WIRE ELECTRICAL DISCHARGE MACHINING (WEDM) PARAMETERS FOR SURFACE ROUGHNESS & MATERIAL REMOVAL RATE IN MACHINING OF AISI D3 TOOL STEEL

Authors

  • Shailesh Pawar, Onkar Phalake, Pravin Somdale, Omkar Patil, Samarth Mane-Deshmukh Department of mechanical engineering, SVERI’s C.O.E. Pandharpur, India

Keywords:

Dielectric,, WEDM,, AISI D3 tool steel

Abstract

This paper presents the outcomes of an experimental analysis carried out to study the effect of micro-sized metal powders, when they are mixed to the dielectric fluid, during Wire Electric Discharge Machining (EDM) of different steels. The work piece material selected as AISI D3 tool steel, peak current, pulse on time, pulse off time, and wire feed rate and mixing of fine metal powders(copper) in dielectric fluid are taken as process input parameters. Material removal rate and Surface Roughness are taken as output parameters to measure the process efficiency. A newly designed experimental set up has been used to perform the task. Taguchi design of experiments is used to conduct experiments. The achieved results of this work indicate that the addition of fine metal powders in dielectric increases the material removal rate and reduces the surface roughness.

Published

2022-07-03

Issue

2022: NCRTSAE -JUNE

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Shailesh Pawar, Onkar Phalake, Pravin Somdale, Omkar Patil, Samarth Mane-Deshmukh. (2022). EXPERIMENTAL INVESTIGATION & OPTIMIZATION OF WIRE ELECTRICAL DISCHARGE MACHINING (WEDM) PARAMETERS FOR SURFACE ROUGHNESS & MATERIAL REMOVAL RATE IN MACHINING OF AISI D3 TOOL STEEL. International Journal of Innovations in Engineering Research and Technology. https://repo.ijiert.org/index.php/ijiert/article/view/3283