Optimization and Process Parameters of CNC End Mill ing For Aluminum Alloy 6082

Authors

  • K. Siva Kumar PG Student Department of Mechanical Engineering, MITS, Madanapalle, Chittoor/Andhra Pradesh, India
  • Bathina Sreenivasulu Asst. Professor, Department of Mechanical Engineering, MITS, Madanapalle, Chittoor/Andhra Pra desh, India

Keywords:

INTRODUCTION, METHODOLOGY, EXPERIMENTAL PROCEDURE, RESULTS AND DISCUSSIONS

Abstract

The study aims at optimization of cutting parameters in CNC End milling of Aluminum Alloy 6082. CNC milling is a versatile and most widely used operation in present industry. Sur face quality affects fatigue life of components and influences various mechanical properties and has receive d serious attention for many years. In this work, experiments are conducted to analyze the surface roughnes s using various machining parameters such as Spindle speed, feed rate and depth of cut .

Downloads

Published

2021-03-27

Issue

Vol. 2 No. 1 (2015): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

K. Siva Kumar, & Bathina Sreenivasulu. (2021). Optimization and Process Parameters of CNC End Mill ing For Aluminum Alloy 6082. International Journal of Innovations in Engineering Research and Technology, 2(1), 1-6. https://repo.ijiert.org/index.php/ijiert/article/view/257