INVESTIGATING SPRINGBACK OF SEAMLESS TUBES COLD DRAWING PROCESS USING DESIGN OF EXPERIMENTS (DOE) AND MICROSTRUCTURAL INVESTIGATIONS

Authors

  • D. B. Karanjule Research Scholar, Sinhgad College of Engineering, Vadgaon, Pune, M.S., India
  • S. S. Bhamare Registrar, Dr.Babasaheb Ambedkar Technological University, Lonere, M.S., India,
  • T. H. Rao Former Director, R and D Department, I.S.M.T. Limited, Ahmednagar, M.S., India

Keywords:

Cold Drawing, Springback,, Reduction Ratio,, Design of Experiment

Abstract

Cold drawing is widely used manufacturing process for production of seamless tubes. Spring back is one the defect occurring in cold drawing process. A cold drawn tube will try to return to its original configurationupon removal of load. The phenomenon incurs due to an elastic recovery. This work is systematic investigations of optimized parameters to minimize springback viz., reduction ratio, die semi angle, land width and drawing speed through Design of Experimentsand microstructural investigations using X-Ray Diffraction, Scan Electron Microscopy and Metallurgical Microscope. The results of this study indicates that 10-15 % reduction ratio, 15 degree die semi angle,10 mm land width and 8 m/min drawing speed gives least springback for ST 52 tube material and AISI D3 die-plug material. This study has improved springback value significantly through series of experimentation and reduced the rejection by 3 % in precision tubes saving substantial amount of the cold drawing manufacturing industry.

Downloads

Published

2021-03-27

Issue

2019: ICSD

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

D. B. Karanjule, S. S. Bhamare, & T. H. Rao. (2021). INVESTIGATING SPRINGBACK OF SEAMLESS TUBES COLD DRAWING PROCESS USING DESIGN OF EXPERIMENTS (DOE) AND MICROSTRUCTURAL INVESTIGATIONS. International Journal of Innovations in Engineering Research and Technology, 1-7. https://repo.ijiert.org/index.php/ijiert/article/view/2037