Application of ANOVA and ANN Technique for Optimize Of CNC Machining Parameters

Authors

  • N.Prabhakar P.G student, Mechanical Engineering Department, MITS, Madanapalle, Indi a.
  • B. Sreenivasulu Assistant Professor Mechanical Engineering Department, MITS, Madan apalle, India.
  • U.Nagaraju P.G student, Mechanical Engineering Department, MITS, Madanapalle, Indi a.

Keywords:

Surface Roughnes, , Material removal rate, ANN (Artificial N eural Network),, ANOVA Analysis of variance and Regression modeling.

Abstract

In the present study, the influence of machining parameters on surfac e roughness and material removal rate is examined by utilizing ANN& ANOVA techniques. Three important variables i.e. spindle velocity, depth of cut and feed rate which are influence on the surface roughness and mater ial removal rate are examined and also analyzed. Artificial Neural Network and Analysis of variance t echniques are effective tools for analyze and optimize the cutting parameters. Based on taguchi, design of expe riments, L27 orthogonal array was selected for conducting turning experiments. 3 factors are considered at 3 levels for orthogonal array L27 design. The experimentation has been conducted on Aluminum alloy AL 6253 using CNC t urner with carbide tip tool and experimental results are taken for preparing of the ANN model. The experimental results were analyzed by using ANOVA and the regression equation for predicting the surface roughness and MRR.

Downloads

Published

2021-03-27

Issue

Vol. 1 No. 1 (2014): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

N.Prabhakar, B. Sreenivasulu, & U.Nagaraju. (2021). Application of ANOVA and ANN Technique for Optimize Of CNC Machining Parameters. International Journal of Innovations in Engineering Research and Technology, 1(1), 1-12. https://repo.ijiert.org/index.php/ijiert/article/view/198