OVERVIEW OF FATIGUE FAILURE OF CONNECTING ROD USED IN A LIGHT COMMERCIAL VEHICLE (LCV) THROUGH FINITE ELEMENT ANALYSIS

Authors

  • Mr.Gajanan Dinkarrao More, M.E. Mech/ Design – 2nd yr Terna College of Engineering, Osmanabad
  • Prof.V.V.Mane Mechanical Engg Dept., Terna College of Engineering, Osmanabad
  • Prof.M.S.Kadam Bramadev Mane Institute of Technology Solapur
  • Prof.A.B.Ghalake Mechanical Engg Dept., Terna College of Engineering, Osmanabad

Abstract

This study is carried out in view to verify and suggest design for reduction of mass & cost for connecting rod made by structural steel for 970 CC four cylinder four stroke engine. Every stroke in the engine is need to have to its nearby components to cyclic loading that push and pulls the crankshaft and connecting rod. The design of the connecting rod can be done in a specified manner, if study carried out to identify the effects of the operating loads on the component in the form of the type of stress induced with its higher value and the identification of areas where stresses over the component. While writing this paper, author has given main concentration mainly towards two major sections, finite element analysis and optimization for design and mass reduction.

Downloads

Published

2021-02-25

Issue

Vol. 3 No. 2 (2016): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format
  2. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. NonCommercial — You may not use the material for commercial purposes .
  3. NoDerivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
  4. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

 

Rights of Authors

Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.

How to Cite

Mr.Gajanan Dinkarrao More, Prof.V.V.Mane, Prof.M.S.Kadam, & Prof.A.B.Ghalake. (2021). OVERVIEW OF FATIGUE FAILURE OF CONNECTING ROD USED IN A LIGHT COMMERCIAL VEHICLE (LCV) THROUGH FINITE ELEMENT ANALYSIS. International Journal of Innovations in Engineering Research and Technology, 3(2), 1-6. https://repo.ijiert.org/index.php/ijiert/article/view/837