EXPERIMENTAL ANALYSIS OF FIN TUBE AND BARE TUBE TYPE TUBE-IN-TUBE HEAT EXCHANGER

Authors

  • Kamalesh S. Kulkarni Assistant Professor, Department of Mechanical Engineering, VACOE, Ahmednagar, India
  • Ravindra M. Ghodke Assistant Professor, Department of Mechanical Engineering, VACOE, Ahmednagar, India

Keywords:

Heat exchanger, types of fins, material used, heat transfer rate

Abstract

Heat exchangers are the devices that facilitate the exchange of heat between the two fluids that are at different temperatures while keeping them from mixing with each other. In bare tube heat exchanger, the heat transfer rate is minimum so in order to increase the heat transfer rate different types of fins are used. The rate of heat transfer depends on the surface area of the fin. Rectangular and circular type fins are popular choices for transferring the heat from the primary surface of heat exchanger. In this paper, heat transfer rate and fin effectiveness for rectangular and circular fins were analysed for parallel flow and counter flow arrangement and comparison is done with bare tube (tube without fin) heat exchanger. Performance of rectangular fin is efficient than the circular fin.

Downloads

Published

2021-03-27

Issue

2015: ICITDCEME

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Kamalesh S. Kulkarni, & Ravindra M. Ghodke. (2021). EXPERIMENTAL ANALYSIS OF FIN TUBE AND BARE TUBE TYPE TUBE-IN-TUBE HEAT EXCHANGER . International Journal of Innovations in Engineering Research and Technology, 1-5. https://repo.ijiert.org/index.php/ijiert/article/view/743