PLASTIC INJECTION MOLD DESIGN FOR AN AUTOMOTIVE COMPONENT ‘AIR VENT BEZEL’ THROUGH MOLD FLOW ANALYSIS FOR DESIGN ENHANCEMENT

Authors

  • Mr. Jitendra Ganeshkar epartment of mechanical engineering, MGM's Jawaharlal Nehru Engineering College Aurangabad- 431003, Maharashtra, India
  • Prof. R.B.Patil Associate Professor, Department of mechanical engineering, MGM's Jawaharlal Nehru Engineering College Aurangabad- 431003, Maharashtra, India

Keywords:

PROBLEM DEFINITION

Abstract

Designer's of plastic injection Molds need to study from this point of view, the type of Mold to be designed, the physical Mold orientation, the dimensions for each of the element in the Mold, the location of the gate, runner, requirement of insert, draft angle requirement, shrinkage factor, location of cooling channels. Design can also be simplified by using standardized parts of the mold such as ejector pins. By eliminating the obstruction to smooth flow of plastic a good of quality component can be achieved. Mold Design forms the basis of the development work required for producing the desired number of units in a given time frame, with proper mold design a customer can achieve adequate cycle times, part strength and required level of surface finish. Multi-cavity molds can help produce the components in mass quantities in a short duration.

Downloads

Published

2021-03-27

Issue

2015: ICITDCEME

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Mr. Jitendra Ganeshkar, & Prof. R.B.Patil. (2021). PLASTIC INJECTION MOLD DESIGN FOR AN AUTOMOTIVE COMPONENT ‘AIR VENT BEZEL’ THROUGH MOLD FLOW ANALYSIS FOR DESIGN ENHANCEMENT. International Journal of Innovations in Engineering Research and Technology, 1-9. https://repo.ijiert.org/index.php/ijiert/article/view/722