REVIEW ON PARAMETER OPTIMIZATION OF SELF LUBRICATING BEARING

Authors

  • Rohitkumar Gangarde, Department of Mechanical Engineering, Pravara Rural Engineering College , Loni, Savitribai Phule Pune University, India
  • R. R. Kharde Department of Mechanical Engineering, Pravara Rural Engineering College , Loni, Savitribai Phule Pune University, India
  • Avinash Jagtap Manager-Production, GKN Sinter Metals Pvt. Ltd., Ahmednagar

Keywords:

Oil Content, Powder Weight, Component Density, Sintering Temperature,

Abstract

The Self Lubricating Bearing is used in Electronic Motors, Fuel Pumps, Actuators, Household Appliances etc. Self Lubricating Bearings are manufactured only by Powder Metallurgy, since Porosity needed for Oil Content can be achieved only by Powder Metallurgy. High Oil Content is desired for better operation of bearing. Oil Content depends on parameters like Powder Weight, Density of Component, Sintering Temperature and Sintering Speed etc. The Bearing manufactured by GKN Sinter Metals has Weight around 22-25 gm andDensity around 5.8-6.0 gm/cc with Oil content about 18-20%. The main objective of the project is to optimize the parameter values to achieve

Downloads

Published

2021-03-27

Issue

2015: ICITDCEME

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Rohitkumar Gangarde, R. R. Kharde, & Avinash Jagtap. (2021). REVIEW ON PARAMETER OPTIMIZATION OF SELF LUBRICATING BEARING. International Journal of Innovations in Engineering Research and Technology, 1-4. https://repo.ijiert.org/index.php/ijiert/article/view/660