ANALYSIS OF CUTTING FORCES OF THE LATHE TOOL DYNAMOMETER

Authors

  • Sanjeev Sharma Department of Mechanical Engineering, Chandigarh Engineering College, Landran, Punjab, India
  • Rajdeep Singh Department of Mechanical Engineering, Chandigarh Engineering College, Landran, Punjab, India
  • Sandeep Jindal Department of Mechanical Engineering, Chandigarh Engineering College, Landran, Punjab, India

Keywords:

DYNAMIC FORCE MEASUREMENT

Abstract

Current research focused on the assessment of metal machining process parameters and on the development of adaptive control, shows that machine performance, work-piece and tool material selections, tool life, quality of machined surfaces, the geometry of cutting tool edges, and cutting conditions are closely related to the cutting forces. The paper deals with checking the design of lathe tool dynamometer under the capacity of 500 kg and optimization of their cutting force measurement. In this, mechanical gauges were replaced by resistance strain gauges which are being utilized to sense the cutting forces during machining and give the necessary information of cutting forces in terms of resistances which is the measure of cutting and feed forces.

Downloads

Published

2021-03-27

Issue

Vol. 2 No. 11 (2015): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format
  2. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. NonCommercial — You may not use the material for commercial purposes .
  3. NoDerivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
  4. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

 

Rights of Authors

Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.

How to Cite

Sanjeev Sharma, Rajdeep Singh, & Sandeep Jindal. (2021). ANALYSIS OF CUTTING FORCES OF THE LATHE TOOL DYNAMOMETER . International Journal of Innovations in Engineering Research and Technology, 2(11), 1-8. https://repo.ijiert.org/index.php/ijiert/article/view/582