COLD FLOW SIMULATION IN AN IC ENGINE

Authors

  • Rohith S Department of Mechanical Engineering, ATMECE, Mysuru, India
  • Swarna kiran S Department of Mechanical Engineering, ATMECE, Mysuru, India

Keywords:

Cold Flow Simulation, Flow dynamics, Valve lift

Abstract

Fluid flow dynamics inside an engine combustion cylinder plays an important role for air-fuel mixture preparation. IC Engine model is developed using CATIAV5R20 tool. The model is then imported to Finite Element pre-processing tool HYPER MESH for the meshing analysis. The model is then imported to Finite Element solver tool. ANSYS FLUENT is used for post processing the results. The flow dynamics inside the cylinder for different minimum valve lift is studied using FEA. Dynamic motion is visualized and velocity magnitude is plotted for different crank angle from 0° to 730°. Finally velocities and crank angles for various valve lifts are compared.

Downloads

Published

2021-03-27

Issue

Vol. 2 No. 10 (2015): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Rohith S, & Swarna kiran S. (2021). COLD FLOW SIMULATION IN AN IC ENGINE . International Journal of Innovations in Engineering Research and Technology, 2(10), 1-9. https://repo.ijiert.org/index.php/ijiert/article/view/564