DEVELOPING THE PISTON MATERIAL USING SAND CASTING METHOD TO IMPROVE THE DURABILITY

Authors

  • Sahebagouda Sanganagoudar Research Scholar and Faculty, Mechanical Engineering Department, Fabtech Technical Campus, College of Engineering and Rsearch Sangola , India.
  • B. S.Shimpukade Industrialist, Chairman, Shimpukade Group of Industries MIDC Kolhapur, India
  • Swarup Kisan Lavate, Akshay Anna Kalebag Praveenkumar Shrimant Athwale, Dhanaji Jotiram Chavan UG Student, Mechanical Engineering Department, Fabtech Technical Campus, College of Engineering and Rsearch Sangola, India.
  • Sachin Kale Department of Mecahnical Engineeirng, SVERI COE Pandharpur

Keywords:

Piston,, Sand casting,, Durability

Abstract

Automotive sector is massively leading the economy of our country. People are more passionate towards two wheelers as well as four wheeler vehicles due to their efficiency as well as comfortness. Engine is the heart of the every vehicle. Most of the unusual results or damages within the engine could be noticed at the outset of the engine. This leads to the expensive work upon engine sometimes this leads to the replacement of whole engine due to the small failure of engine part. Piston acts a major part during the power generation or the engine. Normally piston should be replaced after certain number of time frame. This will be cast effective as well. Proposed work studies the factors effecting on piston to damage early and prepares piston material using sand casting by adding more than 12% Silicon, which gives the high strength. 

Published

2022-07-03

Issue

2022: NCRTSAE -JUNE

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Sahebagouda Sanganagoudar, B. S.Shimpukade, Swarup Kisan Lavate, Akshay Anna Kalebag Praveenkumar Shrimant Athwale, Dhanaji Jotiram Chavan, & Sachin Kale. (2022). DEVELOPING THE PISTON MATERIAL USING SAND CASTING METHOD TO IMPROVE THE DURABILITY. International Journal of Innovations in Engineering Research and Technology. https://repo.ijiert.org/index.php/ijiert/article/view/3266