SUSTAINABLE MACHINING USING MINIMUM QUANTITY LUBRICATIONA COMPREHENSIVE REVIEW
Keywords:
Cutting fluid, Dry machining,, Surface RoughnessAbstract
In the machining process,conventional cutting fluid injected at the tool-workpiece interface as a coolant. Conventional coolant createsharmful health effects. Minimum quantity lubrication plays acrucial role in the machining process, it works as a substitute to conventional lubrication system by reducing the quantity of lubricant used. It reduces environmentalimpact also protected possible health hazard an operator. Also,machining,costscan reduce significantly.It is a method between dry and flood lubrication to ensure lubrication effects. This review article provides recent advancementsin MQL with a special emphasison turning, milling machining operations. In the end,it is concluded that there is an improvement in surface roughness,chip removal, tool life and tool wear with use of MQL when comparedwith dry machiningand conventional cooling
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0 DEED).
You are free to:
- Share — copy and redistribute the material in any medium or format
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes .
- NoDerivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
Rights of Authors
Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.
