EXPERIMENTAL AND NUMERICAL STUDY OF WELDED CURVED PLATES

Authors

  • MR. JAIDEEP BUDGUDE Assistant Professor, Department of Mechanical Engineering,MMCOE, Karvenagar, Pune, M.S.
  • MR. GANESH WAGH Assistant Professor, Department of Mechanical Engineering,MMCOE, Karvenagar, Pune, M.S.

Keywords:

Fillet weld,, Lap joint,, MS AND CS material,

Abstract

Welding is widely used in all the fabrication process for the development of structural component. An accurate and physically suitable curved fillet model is tobegiven as input for analysis of welding process. Flux core arc welding (FCAW) is an arcwelding process that that usescontinuousflux cored filler wire . Theflux is used as a welding protection from the atmosphere environment. Materials like CS and MS with varying thickness of 5,6,7 mm and overlapping angles starting with 30° and success dingwith minimum difference of 5° in consecutiveangle up to100° and tested using UTM machine . Metallurgicalwelded joints that are in service may be subjected to high stresses and different types of loads such as fatigue loads, tension loads compression loads and thus temperature and residual stress modeling is one of the complex processeswhich utilize the weld parameters and properties at higher temperature. Finite element analysis (FEA) has become a practical method of predicting stresses and deflection for loaded structures. In this study, finite element analysis software, ANSYS, is used for a parametric study for effect

Downloads

Published

2021-03-27

Issue

Vol. 6 No. 2 (2019): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format
  2. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. NonCommercial — You may not use the material for commercial purposes .
  3. NoDerivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
  4. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

 

Rights of Authors

Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.

How to Cite

MR. JAIDEEP BUDGUDE, & MR. GANESH WAGH. (2021). EXPERIMENTAL AND NUMERICAL STUDY OF WELDED CURVED PLATES. International Journal of Innovations in Engineering Research and Technology, 6(2), 1-12. https://repo.ijiert.org/index.php/ijiert/article/view/1788