PARAMETRIC OPTIMIZATION FOR IMPROVED SURFACE FINISH IN CNC TURNING OPERATION

Authors

  • SWATI ARVIND KEKADE Mechanical Engineering Department, A. G. Patil Institute of Technology, Solapur, India.
  • PROF. V.V. POTDAR Mechanical Engineering Department, A. G. Patil Institute of Technology, Solapur, India.

Keywords:

LITERATURE REVIEW, K. PALANIKUMAR

Abstract

The parameters affecting the roughness of surfaces produced in the turning process for various materials have been studied by many researchers. Design of experimentswere conducted for the analysis of the influence of the turning parameters such as cutting speed, feed rate and depth of cut on the surface roughness.This paper presents a novel approach for the optimization of machining parameters on turning of thetool work piece combination of the Raw material HCHCr with cemented carbide and CBN tool. The parameters –Speed, Feed and Depth of cut to be maintained for HCHCr weredetermined in terms of optional values or levels for the tool. Historic data wasreferred from the records of the company to understand the effect of introducing variation in the input to realize a given output as a ‘Response’ for surface finish. Statistical data analyzed using ANOVA, DOE and Regression to identify the given machining parameters for the operation. Experimental run conducted for validating the values realized through this Analytical treatment of the data.Experimental outcomes have proved that theresponses in turning process can be enhanced efficiently through this freshapproach

Downloads

Published

2021-03-27

Issue

2018: NITET

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format
  2. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. NonCommercial — You may not use the material for commercial purposes .
  3. NoDerivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
  4. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

 

Rights of Authors

Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.