FABRICATION AND TESTING OFPOLYMER COMPOSITE MATRIX MATERIAL

Authors

  • ASST.PROFESSOR SHASHI KUMAR Department of Mechanical Engineering,Malla Reddy College of Engineering,Secendrabad
  • SURNILA VIJAY KUMAR Department of Mechanical Engineering,Malla Reddy College of Engineering,Secendrabad
  • SRIKARAM MANOHAR Department of Mechanical Engineering,Malla Reddy College of Engineering,Secendrabad-

Keywords:

Reinforcement material,, Epoxy resin, Hardner

Abstract

The natural composite have beenemerged as potential reinforcement material for composites and that is why many researchers are been attracted towards natural fibers. Naturalfiber offers many benefits such as low density, renewablein nature, biodegradable, low costand harmlessto environment whencompared with the hybrid fibers, which arealso emerging asa promising material due to theirvarious applicationslikefire insulation,resistanceto moisture, superior strength, electricalinsulation. In this projectKenaf, Glass and Jute fibers are compounded with epoxy resin(LY 556)and hardner (HY 951). The fibers are soaked insodium hydroxide with 5 wt% concentration for 24 hours at room temperature and fabricated byusing hand lay-up process.According to the ASTM standards, thefabricated laminates are cut intodifferent sectionsand various mechanical properties such as tensile test, compression test, and water absorption arediscussedand analyzed

Downloads

Published

2021-03-27

Issue

Vol. 5 No. 3 (2018): IJIERT

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format
  2. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. NonCommercial — You may not use the material for commercial purposes .
  3. NoDerivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
  4. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

 

Rights of Authors

Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.

How to Cite

ASST.PROFESSOR SHASHI KUMAR, SURNILA VIJAY KUMAR, & SRIKARAM MANOHAR. (2021). FABRICATION AND TESTING OFPOLYMER COMPOSITE MATRIX MATERIAL. International Journal of Innovations in Engineering Research and Technology, 5(3), 1-6. https://repo.ijiert.org/index.php/ijiert/article/view/1466