HEAT TRANSFER ENHANCEMENT IN TUBULAR HEAT EXCHANGER BY USING TWISTED TAPES WITH VARYING ALTERNATE AXIS LENGTH WITH AL2O3/WATER NANOFLUID

Authors

  • PRITAM M. JADHAV Govt. College of Engineering, Karad
  • GIRISH PATIL Govt. College of Engineering, Karad
  • JAYPAL MALI Govt. College Of Engineering, Karad
  • Dr. R.M.Warkhedkar Govt. College Of Engineering, Karad

Keywords:

Heat transfer enhancement, friction factor,, swirl flow,, twisted-tape

Abstract

Heat transfer enhancement in a tube using twisted tape with alternate axes (TA) at different alternate lengths (in terms of alternate length to twist length ratio, l/y = 0.5, 1.0, and 1.5) and Al2O3/water nanofluid have been experimentally investigated.The concentration of nanofluid was varied from 0.05 to 0.15% by volume while the twistratio (y/W) of 3 and 4 were used. The twisted tapes with alternate lengths as well as a typical twisted tape were tested for Reynolds number varying from 5000 to 20,000. The results show that Nusselt number enhanced with increase in Reynolds number and concentration of nanofluid.Also the Nusselt number and friction factor obtained were increased with decreasing alternate length (l) and twist ratio of twisted tapes.

Downloads

Published

2021-03-27

Issue

Section

Articles