REVIEW ON DIE SPOT WELDING MACHINE
Keywords:
Current, Microwave Transformer, Sheet Metal Welding.Abstract
Resistance spot welding is widely used in the fabrication of vehicle bodies andparts of their equipment. The article presents the methodology and the results of non-destructive ultrasonic testing of resistance spot welded joints of thin steel sheet with closed profile. Non-destructive test results were verified on the basis of welded joint area after destructive testing. The obtained results were used to develop an assessment technique for spot welded joints of closed profile with steel sheet, which could be used in factories employing such joints. In addition, the article makes comparison between the costs of the developed assessment technique and currently used destructivemethod.This paper addresses the mechanical properties of ferrite steel resistance spot welds during quasi-static tensile test. The mechanical properties are described in terms of peak load. It was shown that the fusion zone size is the most important. The fusion zone size can control the solidification of the grain which controlling factor of spot weld peak load. The dendritic grain and equiaxial axial grains occurred in the microstructures of the welded specimens joined at various welding currents and electrode forces. The failure mechanism of resistance spot welds during tensile test was studied with the aid of thermography. The thermography gives visible data of temperature changes on the surface of specimen. In light of the failure mechanism, the simple model is proposed to ensure pull out failuremode.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
