STRUCTURAL ANALYSIS FOR WEIGHT OPTIMIZATION OF MACHINE TOOL BED

Authors

  • Gururaj Deshpande Assistant Prof., Department of Mechanical Engg. A.G.P.I.T.,Solapur, India,
  • S.T. Jagtap Associate Prof, Department of Mechanical Engg. NBN, Kegaun, Solapur, India.
  • A.I. Ambesange Assistant Prof., Department of Mechanical Engg. A.G.P.I.T.,Solapur, India,

Keywords:

LITERATURE REVIEW

Abstract

With the increasing pace in the industrial and technological developments there is a phenomenal change in the trend of machine tool development that brings to the fore, the modern production requirements like higher speeds, closer tolerances and accuracy. The performance of a machine tool depends primarily upon the static and dynamic behavior of the basic structure. In the present day structural engineering, the designing of the machine tools to have high stiffness with optimum use of materials to its fullestcapability.Machine tool structures have been analyzed in the past to study and improve their rigidity using several methods like Analytical Methods, Strength of materials methods, Elasticity methods and simulation methods using packages. Under simulation method use of Finite Element Analysis has become one of the most powerful and popular tool for structural analysis. The same could be used in the analysis of machine tool.The performance of machine tool depends upon the static and dynamic behavior of the basic machine structure. The bed structure has to resist the deformations caused by the weight of the moving part of the machine and cutting forces. The machine tool must be made up of proper material with high static and dynamic stiffness to resist thedeformations. In the present investigation structural analysis of the CNC machine tool main bed for weight optimization is carried out using FEA commercial package ANSYS 10.0. Modal analysis was carried out to determine the natural frequency to verify stiffness of the bed.

Downloads

Published

2021-03-27

Issue

2016: NITET

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Under the Creative Commons Attribution- 4.0 International License (CC BY-4.0 DEED).

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Gururaj Deshpande, S.T. Jagtap, & A.I. Ambesange. (2021). STRUCTURAL ANALYSIS FOR WEIGHT OPTIMIZATION OF MACHINE TOOL BED. International Journal of Innovations in Engineering Research and Technology, 1-7. https://repo.ijiert.org/index.php/ijiert/article/view/1226